3m scotchgard paint protection
clear bra
automobile bra

 

Own a boat or personal watercraft?
Introducing our new Keel & Hull Shield product

Save your boat or PWC from grinding sand, abrasive rocks and concrete ramps!

 

 

 

 

We originally started with paint protection for automobiles, RV's and motorcycles.  The product works so well we decided to try it on boats and personal water craft and the results are amazing! 

Our clear film (made by 3M
) adheres to the hull of your boat to protect it against mishaps that can happen in shallow water, such as rubbing against rocks or debris that would normally damage your expensive gel-coat.

Save thousands in gel-coat repairs, because surfaces protected by our film are free from cuts and scratches.
 


 

  About the film

Our Paint Protection Products are made from 3M Scotchgard™ Film which is a rugged eight mil (.008") clear Urethane plastic employing a clear-coat finish for maximum shine. This durable material has been used successfully for years by the military, various auto manufacturers, and NASCAR race teams in rock chip prone areas with incredible results. Never before has a product been invented that provides so much protection with such low visibility.
 

 
  Product Overview

We computer cut the  3M Scotchgard™ film to the length and width you specify. We also allow you to choose 1 of 3 shapes.  Simply measure the area most vulnerable to abrasion on the bottom of your boat or PWC, place an order and install the protection yourself.  You may also take it to your boat dealer or local boat shop and inquire about installation.  Every order includes free shipping and installation tools.

The image to the right is an example of a shape, length and width that could be protected by our shield.  Keep in mind, this product will not hinder the performance or speed of your boat or PWC.
 

 
 
  • Maintenance Free!
  • Use all over your boat or PWC
  • Virtually Invisible!
  • Wash & Wax As Usual
  • Pre-cut to the size you need
  • Won't Harm Your Gelcoat
  • Can Be Safely Removed
  • Doesn't Peel, Crack or Fade
  • In most cases it can be installed while on the trailer
   
 

Common Questions

What is paint protection film?
Paint protection film is a transparent urethane film that adheres to the gelcoat or painted surface of vulnerable areas on your vehicle, boat or PWC. Our film is made by 3M
(view technical data sheet) and it is one of the most advanced protective coating products you can apply to your vehicle, boat or PWC.

Can I install this kit myself?
We provide instructions and online videos you can download and watch the various pieces being installed. We also include our installation kit with each order.  It does take a little patience and usually it's done while the boat or PWC is on the trailer so measure carefully so you get a perfect fitting piece.

Can I reuse this material once it's already applied?
No, Paint Protection film must be applied immediately upon being removed from its backing. The film can not be removed and reused once applied.

Will this product damage my paint or gelcoat?
No, of course not! This product is designed to help protect your paint and/or gelcoat, not damage it!

Can it be removed?
Yes. It can be removed easily without damage to the gelcoat or paint. To remove the film, you must heat the surface to approximately 150°F while working a corner of the film with your fingernail. Once you have enough of the material free from the surface to hold on to, slowly pull the film from the paint. 3M adhesive remover can easily remove any residue if this occurs.

How hard is it to see after it is applied?
The material is virtually invisible.  The product will most likely go un-noticed unless you point it out.

I would like to buy this film by the foot for various places on my boat/PWC.
Yes, this is common.  It works great on wakeboard towers also....or any place you see needs protection and is a gelcoat or painted surface.  Simply add a couple of extra feet to your order and either cut it yourself or email us and we can pre-cut it for you.

Note: This protection is not meant for boats that sit in water full time.  It is ideal for boats or PWC that get tailored after a weekend or weeklong vacation at the lake or river.


 

  ORDER TODAY

1) Decide which shape you prefer using the sample above
2) Select kit with width you feel appropriate for your application
3) Using the dropdown, select the length you need
4) Click the 'Add to Cart" button and proceed to secure checkout form

 

  SHAPE 1
   
 
Shape 1 Kit  6 inch wide

$22 PER FOOT

  LENGTH FEET

Shape 1 Kit  12 inch wide

$24 PER FOOT

  LENGTH FEET

     
 
Shape 1 Kit  18 inch wide

$26 PER FOOT

  LENGTH FEET

Shape 1 Kit  24 inch wide

$28 PER FOOT

  LENGTH FEET

  SHAPE 2  
     
 
Shape 2 Kit  6 inch wide

$24 PER FOOT

  LENGTH FEET

Shape 2 Kit  12 inch wide

$24 PER FOOT

  LENGTH FEET

     
 
Shape 2 Kit  18 inch wide

$24 PER FOOT

  LENGTH FEET

Shape 2 Kit  24 inch wide

$24 PER FOOT

  LENGTH FEET

  SHAPE 3  
     
 
Shape 3 Kit  6 inch wide

$24 PER FOOT

  LENGTH FEET

Shape 3 Kit  12 inch wide

$24 PER FOOT

  LENGTH FEET

     
 
Shape 3 Kit  18 inch wide

$24 PER FOOT

  LENGTH FEET

Shape 3 Kit  24 inch wide

$24 PER FOOT

  LENGTH FEET

     
  If you need a specialty piece made please email us and we'll get back to you right away.

 


Home | Overview | Shop Online | Gallery | How To | FAQs | Contact

.Copyright© 2007 InvisibleMask All rights reserved.